- Stock#:Ez14247
- Price:$29,500
- Year:1980
- Region:Northeast
- Condition:Used
| Note: As Is Note: In 1989 Upgraded Ball screws & Fanuc Servo Drive to the Head Vertical Travel & the Column Transverse Travel. Currently we believe there are 2 Fanuc control cards that are NOT functional and thus the machine control does not boot up and that makes the machine not operational. When the machine did work it worked fine. This is NOT a cnc machine. It still uses the manual pendant for operational control.
SPECIFICATIONS: Column Longitudinal Travel: 18' 3", Rack & Pinion Driven Head Vertical Travel: 98", Driven by Ball Screw & Fanuc Servo Motor Column Cross Travel: 15.7", Driven by Ball Screw & Fanuc Servo Motor Spindle Travel: 39" (27) Spindle Speeds: 4.5 to 900 RPM Spindle Taper: #50 with Power Draw Bolt Facing Plate Diameter: 34" (18) Facing Plate RPM: 4.5 to 180 RPM Spindle Feeds: .03 to 48 MM Per Rev., & .0016 to 2.00 TPR (36) Feeds to Head & Column: .024 to 78.7 IPM EQUIPPED WITH: Rapid Traverse Universal Right Angle Milling Head with 24-1/2" Long Extension Tailstock with 78" Power Vertical Travel & 39" Power Longitudinal Travel on the Base 3-Axs Acu Rite DRO: Head Vertical Travel, Column Cross Travel & Spindle Travel Pendant Control Sliding Metal Way Covers on the Bed Wedge Type Leveling Pads All Hard Ways NO Floor Plates with Machine Spindle Drive Motor: 18.5 KW, 3/60/480V Note: In 1989 Upgraded Ballscrews & Fanuc Servo Drive to the Head Vertical Travel & the Column Transverse Travel. SHIPPING SIZES: Bed & Column Base: 35' L x 104" W x 40" H x 27,000 Lbs. Head: 128" L x 49" W x 51" H x 11,000 Lbs. Column: 13' L x 48" W x 68" H x 12,500 Lbs. Tailstock: 92" L x 36" W x 124" H x 5,500 Lbs. Skid with Right Angle Attachment & Extension: 4' L x 40" W x 40" H x 1,250 Lbs. Overall Machine Assembled: 35' L x 170" W x 221" H
|
